25.4.3 Series and Parallel of Power
There are three ways of connecting the power supply: series connection, parallel connection and series/parallel connection.
25.4.3.1 Series Connection
The way to connect a (+) pole of one cell to a (-) pole of another is series connection. At this time, the total electromotive force is the sum of the electromotive force of all the batteries.
25.4.2 Series and Parallel of Resistance
Basic resistance connections include a series connection where the combined resistance increases and a parallel connection where the combined resistance is reduced.There are three ways of connecting resistance: series connection, parallel connection and series/parallel connection.
25.4.2.1 Series Connection of Resistance
● Combined resistance of series connection
25.4 Basics of Electronic Circuit
Here, we will explain the basic knowledge of electronic circuit.
25.4.1 Short and Resistance
Short is also generally referred to as a short circuit, which means that two wires with different potentials are directly connected to each other, such as connecting a (+) wire and a (-) wire without a resistor in a circuit where electricity is supplied. When this direct connection is made, excessive current flows for a moment and spark occurs.
25.3 Basics of Electricity/Electronics
Here, we will explain the basics of electricity and electronics.
If you need additional information, please refer to the following:
■ http://portal.hrd.go.kr/EL/contents/084/01/ch01_02.htm
■ http://cafe.daum.net/kneeng
■ http://blog.daum.net/hongbkim/2542
■ http://blog.naver.com/dhjdhj11/150184044066
25.2.3 Precautions and Features in Using GPIO
● Precautions in using GPIO pin
■ When powering Raspberry Pi, make sure that metal object does not touch the GPIO pin.
■ Do not supply more than total 250mA current from 5V power pin.
■ Do not supply more than total 50mA current from 3.3V power pin.
■ Do not supply higher than 3.3V to all GPIO pins at the input.
■ Do not use more than 3mA current per pin at the output.
■ Do not supply higher than 5V power to Raspberry Pi.
25.2.2 GPIO Port Details
25.2.2.1 GPIO Basics
There are various kinds of GPIO interface pins in Raspberry Pi. Each pin has its own purpose, and several pins are used together to make a specific circuit.
● DNC (Do Not Connect )
25.2 GPIO Details
25.2.1 GPIO Device
25.2.1.1 GPIO Pin Layout
Since Raspberry Pi B+ model, Raspberry Pi board has a 40-pin GPIO connector with 2 male headers arranged on the left side of SD card slot. The spacing between each header is 2.54 mm (0.1 inches), which is one of the standard spacings used in electronics and is the standard spacing for prototyping platforms including stripeboard and breadboard.
25.1 Raspberry Pi and External Interface
25.1.1 Meaning of External Interface
Standard PCs like regular desktops can run the same program much faster than Raspberry Pi. However, Raspberry Pi has a capability that these standard PCs can not provide, which is a bidirectional interface with external devices. Raspberry Pi can communicate with and control devices outside the system through an interface with external devices. It can receive input or output through an external device, or control the external device. It is possible to receive a various measuring values from an external sensor, to determine the situation, and to perform appropriate processing accordingly, or to build a system for directly controlling an external system by creating an embedded program.
Chapter 25 External Interface
Chapter’s Main Topics
Raspberry Pi can communicate with and control devices outside the system through an interface with external devices. The core device of the Raspberry Pi used here is GPIO (General Purpose Input Output) port. Here, we discuss how to interface with external devices using GPIO.
It includes descriptions on the following topics:
■ GPIO Details
■ Fundamentals of electricity/electronics
■ Fundamentals of Electronic circuit
■ Preparing interface
■ GPIO Library
■ Digital Input/Output interface
■ Interface using sensor
24.4.9 Including PHP Script File
PHP provides a way to insert ans use the text/code/markup in a specific file into the current working document. This function is very useful when you need to repeatedly use the same PHP, HTML, or text on multiple pages in PHP.
In PHP, “include” or “require” statement allows a web server to insert the contents of a particular PHP file into the PHP file of current document before executing a particular document.