Raspberry Pi_Kor_03.4.1 SD 카드

.4 저장장치

컴퓨터에서 저장장치는 운영체제 프로그램을 설치하거나 프로그램이 실행과정에서 보관이 필요한 자료를 저장하기 위해서 사용한다. Raspberry Pi에서는 SD card를 사용하거나 필요한 경우 외부의 저장장치를 사용할 수 있다.

3.4.1 SD 카드

Raspberry Pi에서는 SD card에 운영체제를 설치하도록 되어 있어서, SD card가 반드시 필요하다.

SD card를 구입할 때는 용량이 최소 4 GB 이상은 되어야 하며, 보통 8 GB 이상을 사용하는 것이 좋다. 경우에 따라서 시스템에 많은 프로그램을 설치하거나 많은 자료를 저장하고자 하면 16 GB나 32 GB 용량의 SD card를 사용하는 것이 좋다.

Raspberry Pi_Eng_03.4.1 SD Card

.4.1 SD Card

As Raspberry Pi is designed to install operation system on the SD card, SD card is essential.

When purchasing an SD card, the capacity should be at least 4 GB, and it is recommended t use usually 8 GB or more. In some cases, you might want to use a 16 GB or 32 GB SD card if you want to install a lot of programs or to save a lot of data on your system.

Raspberry Pi_Kor_02.3 SD card slot

2.3 SD card slot

Raspberry Pi는 운영체제를 설치하거나 필요한 자료를 저장하기 위한 저장장치로 flash memory의 일종인 SD card를 지원한다. SD card는 용량이나 성능 면에서는 hard disk에 미치지 못하지만 일반 hard disk에 비해서 전력소모가 아주 적다는 장점이 있다.

Raspberry Pi_Eng_02.3 SD Card Slot

.3 SD Card Slot

Raspberry Pi supports SD card which is a type of flash memory for a storage device for installing operating system or storing necessary data. The SD card has less capacity and performance than a hard disk, but it has the advantage that it consumes less power than a normal hard disk.

In Raspberry Pi, an SD card has a special meaning, unlike in other computer systems. When Raspberry Pi is powered up and started for the first time, a special program called Boot Loader is supposed to read the operating system installed on Raspberry Pi from the SD card. If you do not have an SD card or you do not have the proper operating system installed on your SD card, you can not start the Raspberry Pi system.